H3C S7500E Series Command Manual page 1143

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – QoS

H3C S7500E Series Ethernet Switches

Accounting Enable:

Committed Access Rate:

Table 2-9 Description on the fields of the display qos vlan-policy command

2.3.6 qos apply policy

qos apply policy policy-name { inbound | outbound }

undo qos apply policy { inbound | outbound }

Ethernet port view, port group view

inbound: Specifies the inbound direction.

outbound: Specifies the outbound direction.

policy-name: Specifies the policy name.

Use the qos apply policy command to apply a policy on a port or a port group.

Use the undo qos apply policy command to remove the policy applied on a port or a

Note that, when you apply a policy by using the qos apply policy command, whether

or not the inbound/outbound keyword can take effect depends on the actions defined

in the traffic behavior and LPU types, as described in

CIR 6400 (kbps), CBS 4000 (byte), EBS 4000 (byte)

Green Action: pass

Red Action: discard

Yellow Action: pass

Green : 0(Packets)

ID of the VLAN where the VLAN policy is applied

VLAN policy is applied in the inbound direction of the VLAN.

Name of the class in the policy and its configuration

Name of the behavior in the policy and its configuration

Chapter 2 QoS Policy Configuration Commands

Chapters

Table of Contents