Reset Udp Ipv6 Statistics; Tcp Ipv6 Timer Fin-Timeout - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches

1.1.42 reset udp ipv6 statistics

Syntax
reset udp ipv6 statistics
View
User view
Parameters
None
Description
Use the reset udp ipv6 statistics command to clear the statistics of all IPv6 UDP
packets.
Examples
# Clear the statistics of all IPv6 UDP packets.
<Sysname> reset udp ipv6 statistics

1.1.43 tcp ipv6 timer fin-timeout

Syntax
tcp ipv6 timer fin-timeout wait-time
undo tcp ipv6 timer fin-timeout
View
System view
Parameters
wait-time: Length of the finwait timer for IPv6 TCP connections in seconds, in the range
of 76 to 3,600.
Description
Use the tcp ipv6 timer fin-timeout command to set the finwait timer for IPv6 TCP
connections
Use the undo tcp ipv6 timer fin-timeout command to restore the default finwait timer
length.
By default, the length of the finwait timer is 675 seconds.
Examples
# Set the finwait timer length of IPv6 TCP connections to 800 seconds.
Chapter 1 IPv6 Basics Configuration Commands
1-41