Igmp-Snooping Static-Router-Port; Igmp-Snooping Version - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches

1.1.25 igmp-snooping static-router-port

Syntax
igmp-snooping static-router-port vlan vlan-id
undo igmp-snooping static-router-port vlan vlan-id
View
Ethernet interface view, port group view
Parameters
vlan vlan-id: Specifies a VLAN in which one or more static router ports are to be
configured, where vlan-id is in the range of 1 to 4094.
Description
Use the igmp-snooping static-router-port command to enable the static router port
function.
Use the undo igmp-snooping static-router-port command to disable the static router
port function.
By default, the static router port function is not enabled.
Note that:
This command works on IGMP Snooping–enabled VLANs and VLANs with IGMP
enabled on the corresponding VLAN interfaces.
If configured in Ethernet interface view, this feature takes effect on the port only if
the port belongs to the specified VLAN.
If configured in port group view, this feature takes effect only on those ports in this
port group that belong to the specified VLAN.
Examples
# Enable the static router port function on Ethernet 2/0/1, which belongs to VLAN 2.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] igmp-snooping static-router-port vlan 2

1.1.26 igmp-snooping version

Syntax
igmp-snooping version version-number
undo igmp-snooping version
Chapter 1 IGMP Snooping Configuration Commands
1-23