Display Poe-Power - H3C S7500E Series Command Manual

Command Manual – PoE
H3C S7500E Series Ethernet Switches
PSE Power Enabled
PSE Power Preempted
PSE Power Priority
PSE Current Power
PSE Average Power
PSE Peak Power
PSE Max Power
PSE Remaining Guaranteed
PSE CPLD Version
PSE Software Version
PSE Hardware Version
PSE Legacy Detection
PSE Utilization-threshold
PSE Pse-policy Mode
PSE Pd-policy Mode
PSE PD Disconnect Detect
Mode

1.1.8 display poe-power

Syntax
display poe-power
View
Any view
Parameters
None
Field
PoE is enabled for the PSE
PSE power preempted state
Power priority of the PSE
Current power of the PSE
Average power of the PSE
Peak power of the PSE
Maximum power of the PSE
Guaranteed remaining power of the PSE =
Maximum power of the PSE– the sum of the
maximum power of the critical PoE interfaces of
the PSE
PSE CPLD version
PSE software version number
PSE hardware version number
Nonstandard PD detection by the PSE:
PSE power alarm threshold
PSE power management policy mode
PD power management policy mode
PD disconnection detection mode
1-13
Chapter 1 PoE Configuration Commands
Description
no: The power of the PSE is not preempted.
yes: The power of the PSE is preempted so that
it cannot supply power, although PoE is
enabled for the PSE
enable: Enabled
disable: Disabled