Display Qos Policy Global - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Table 2-5 Description on the fields of the display qos policy command
Field
Policy
Classifier
Behavior

2.3.3 display qos policy global

Syntax
display qos policy global { inbound | outbound } [ slot slot-id ]
View
Any view
Parameters
inbound: Displays the QoS policy applied globally in the inbound direction of all ports.
outbound: Displays the QoS policy applied globally in the outbound direction of all
ports.
slot slot-number: Displays the global QoS policy applied on a board. If the slot-number
argument is not specified, the global QoS policy applied on the main control board are
displayed.
Description
Use the display qos policy global command to display information about a global
QoS policy.
Examples
# Display information about the global QoS policy in the inbound direction.
<Sysname> display qos policy global inbound
Direction: Inbound
Policy: test
Classifier: test
Operator: AND
Rule(s) : If-match acl 2000
Behavior: test
Accounting Enable:
Policy name
Class name and the corresponding configuration information
Traffic behavior name and the corresponding configuration
information
2-20
Chapter 2 QoS Policy Configuration Commands
Description