Display Snmp-Agent Statistics - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Table 1-3 Descriptions on the fields of the display snmp-agent mib-view command
View name
MIB Subtree
Subtree mask
Storage-type
View Type
View status

1.1.5 display snmp-agent statistics

Syntax
display snmp-agent statistics
View
Any view
Parameters
None
Description
Use the display snmp-agent statistics command to display SNMP statistics.
Examples
# Display the statistics on the current SNMP.
<Sysname> display snmp-agent statistics
0 Messages delivered to the SNMP entity
0 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
0 Messages which represented an illegal operation for the community supplied
0 ASN.1 or BER errors in the process of decoding
0 Messages passed from the SNMP entity
0 SNMP PDUs which had badValue error-status
0 SNMP PDUs which had genErr error-status
0 SNMP PDUs which had noSuchName error-status
Field
MIB view name
MIB subtree corresponding to the MIB view
MIB subtree mask
Storage type
View type, which can be included or excluded
Included indicates that all nodes of the MIB tree are included
in current view.
Excluded indicates that not all nodes of the MIB tree are
included in current view.
The status of MIB view
Chapter 1 SNMP Configuration Commands
Description
1-5