Default-Metric - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

default-metric

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] default-metric metricValue [ interfaceType interfaceSpecifier ]
Command introduced before JunosE Release 7.1.0.
Configures RIP to use this metric on redistributed routes on all subsequently created
interfaces. The no version restores the default value, 0.
metricValue—Metric to apply to routes; in the range 1–16
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Address Family Configuration, Router Configuration
Chapter 5: D Commands
499