Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 50

JUNOSe 11.1.x Command Reference Guide A to M
Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx Models, and
ERX310 Router (continued)
8
Interface Types and Specifiers
Interface Type Description
gigabitEthernet IEEE 802.3
Gigabit
Ethernet
(GE)
interface
lag IEEE
802.3ad link
aggregation
group (LAG)
interface
loopback Loopback
interface
mlframe-relay Multilink
frame relay
interface
Interface Specifier
slot/port[.subinterface1[.subinterface2 ] ]
slot Number of the chassis slot in the
range 0–6 (ERX7xx models), 0–13
(ERX14xx models), and 0–2 (ERX310
router)
port Port number on the I/O module
The meaning of the subinterface variables
depends on the configuration context. You
can configure Gigabit Ethernet interfaces
with or without VLANs.
VLANs:
subinterface1 Number of the
VLAN subinterface in the range
1–2147483647; no more than
4096 VLAN subinterfaces per
Gigabit Ethernet physical port
subinterface2 When using
PPPoE, the number of the PPPoE
subinterface in the range
1–2147483647; no more than
8000 PPPoE subinterfaces per
Gigabit Ethernet line module
No VLANs:
subinterface1 When using
PPPoE, the number of the PPPoE
subinterface in the range
1–2147483647; no more than
8000 PPPoE subinterfaces per
Gigabit Ethernet line module
subinterface2 Not used
bundle-name[.subinterface ]
bundle-name Name of the bundle
subinterface Number of the LAG
subinterface in the range
1–2147483647
integer
integer Integer in the range
1–4294967293
bundle-name[.subinterface ]
bundle-name Name of the bundle
subinterface Number of the MLFR
subinterface in the range
1–4294967293
Example
gigabitEthernet
3/0.6.20
lag paris.2
loopback 20
mlframe-relay
boston.1