Is-Type - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

is-type

Syntax
Release Information
Description
Options
Mode
1138
is-type { level-1 | level-1-2 | level-2-only }
no is-type
Command introduced before JunosE Release 7.1.0.
Configures the IS-IS level at which the router is to operate. The no version restores the
default value, level-1-2.
level-1—Causes the router to act as a station router
level-1-2—Causes the router to act as both a station router and an area router; the
default setting
level-2-only—Causes the router to act as an area router
Router Configuration
Copyright © 2010, Juniper Networks, Inc.