Newfs - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

newfs

Deletes the complete file system and all files within it, replacing it with a new, empty file system. Use this
command when you want to reload all files in the file system or in the unlikely event that the file system
becomes corrupt.
newfs {/flash | /uflash}
Syntax Definitions
/flash
/uflash
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
It is recommended that you preserve all required image and configuration files by saving them to a
remote host before executing the newfs command.
•
Do not power-down the switch after running the newfs command until you reload all required image
and configuration files.
•
This command can also be used on the secondary CMM.
Examples
-> newfs /flash
-> newfs /uflash
Release History
Release 6.1; command was introduced.
Release 6.4.3; /uflash parameter was added.
Related Commands
N/A
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
page 58-32
This indicates that the complete flash file system will be replaced.
This indicates that the complete uflash file system will be replaced.
File Management Commands
OmniSwitch CLI Reference Guide June 2012