Delete - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

delete

Deletes an existing file.
delete [path/]filename
Syntax Definitions
path/
filename
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Be sure to separate path directories and file names with a slash (/). Refer to the examples below.
•
Use care when deleting files. Depending on your switch and network configurations, specific
configuration and image files must be present for your system to work properly.
•
This command can also be used on the secondary CMM.
Examples
-> delete test_config_file
-> delete flash/test_config_file
Release History
Release 6.1; command was introduced.
Related Commands
rm
MIB Objects
systemServices
systemServicesArg1
systemServicesAction
page 58-18
The path (i.e., location) containing the file being removed. If no path is
specified, the command assumes the current directory.
The name of the existing file being removed. Up to thirty-two (32) char-
acters may be used (e.g., test_config_file).
Deletes an existing file or directory.
File Management Commands
OmniSwitch CLI Reference Guide June 2012