Show Ip Dos Config - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ip dos config

show ip dos config
Displays the configuration parameters of the DoS scan for the switch.
show ip dos config
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command allows the user to view the configuration parameters of the DoS scan. The scan keeps a
record of the penalties incurred by certain types of packets on TCP and UDP ports. When the set penalty
threshold is reached, it is assumed a DoS attack is in progress, and a trap is generated to inform the system
administrator.
Examples
-> show ip dos config
Dos type
-------------------------------------------+-----------------
port scan
tcp sync flood
ping of death
smurf
pepsi
land
teardrop/bonk/boink
loopback-src
invalid-ip
invalid-multicast
unicast dest-ip/multicast-mac
ping overload
arp flood
DoS trap generation
DoS port scan threshold
DoS port scan decay
DoS port scan close port penalty
DoS port scan TCP open port penalty
DoS port scan UDP open port penalty
Dos MAximum Ping Rate
Dos Maximum ARP Request Rate
page 10-138
Status
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
DISABLED
ENABLED
= ENABLED,
= 1000,
= 2,
= 10,
= 0,
= 0,
= 100
= 500
OmniSwitch CLI Reference Guide
IP Commands
March 2011