Ipc Configuration Commands; Display Ipc Channel - H3C SR6600 Command Reference Manual

IPC configuration commands

The display commands in this document display only information about active nodes.
"Local node" refers to the current device or the active MPU.

display ipc channel

Use display ipc channel to display channel information for a node.
Syntax
display ipc channel { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
node node-id: Displays channel information for the node specified by the node-id argument. The
following matrix shows the value ranges for the node-id argument:
SR6602
0 to 1
self-node: Displays channel information for the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display channel information for node 0.
<Sysname> display ipc channel node 0
ChannelID
-----------------------------------------------
19
72
79
94
SR6602-X SR6604/SR6608/SR6616
•
•
0 to 2
•
Description
RPC channel
Portal Backup Channel
DHCP
IPC test channel
0 to 3 for SR6604
0 to 5 for SR6608
0 to 9 for SR6616
87
SR6604-X/SR6608-X/SR6
616-X
•
0 to 13 for SR6604-X
•
0 to 15 for SR6608-X
•
0 to 19 for SR6616-X