Display Channel - H3C S5120-SI Series Command Reference Manual

1
Information Center Configuration Commands
Information Center Configuration Commands

display channel

Syntax
display channel [ channel-number | channel-name ]
View
Any view
Default Level
1: Monitor level
Parameters
channel-number: Displays information of the channel with a specified number, where channel-number
represents the channel number, in the range 0 to 9.
channel-name: Displays information of the channel with a specified name, where channel-name
represents the channel name, which could be a default name or a self-defined name. The user needs to
specify a channel name first before using it as a self-defined channel name. For more information, refer
to the info-center channel name command.
Table 1-1 Information channels for different output destinations
Output destination
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP module
Web interface
Log file
Description
Use the display channel command to display channel information.
If no channel is specified, information for all channels is displayed.
Information channel number
0
1
2
3
4
5
6
9
1-1
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent
channel6
Channel9