Creating A Radius Scheme; Specifying The Radius Authentication/Authorization Servers - H3C S5500-SI Series Operation Manual

When there are users online, you cannot modify RADIUS parameters other than the retransmission
ones and the timers.

Creating a RADIUS Scheme

Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and
enter RADIUS scheme view:
To do...
Enter system view
Create a RADIUS scheme and
enter RADIUS scheme view
A RADIUS scheme can be referenced by more than one ISP domain at the same time.

Specifying the RADIUS Authentication/Authorization Servers

Follow these steps to specify the RADIUS authentication/authorization servers:
To do...
Enter system view
Create a RADIUS scheme and
enter RADIUS scheme view
Specify the primary RADIUS
authentication/authorization
server
Specify the secondary RADIUS
authentication/authorization
server
Use the command...
system-view
radius scheme
radius-scheme-name
Use the command...
system-view
radius scheme
radius-scheme-name
primary authentication
ip-address
[ port-number ]
secondary
authentication
ip-address
[ port-number ]
1-23
Remarks
—
Required
Not defined by default
Remarks
—
Required
Not defined by default
Required
Configure at least one of the
commands
No authentication server by
default