Timer Response-Timeout - H3C s3100 series Command Manual

server is, the shorter the interval can be. It is recommended to set the interval as long as possible
when the number of users is relatively great (≥1000).
different numbers of users.
Table 1-6 Numbers of users and recommended intervals
1 to 99
100 to 499
500 to 999
≥1000
Related commands: retry realtime-accounting, radius scheme.
Examples
# Set the real-time accounting interval of RADIUS scheme radius1 to 51 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer realtime-accounting 51

timer response-timeout

Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameters
seconds: Response timeout time of RADIUS servers, ranging from 1 to 10 seconds.
Description
Use the timer response-timeout command to set the response timeout time of RADIUS servers.
Use the undo timer response-timeout command to restore the default response timeout time of
RADIUS servers.
By default, the response timeout time of RADIUS servers is 3 seconds.
Note that:
After sending out a RADIUS request (authentication/authorization request or accounting request)
to a RADIUS server, the switch waits for a response from the server. The maximum time that the
switch can wait for the response is called the response timeout time of RADIUS servers, and the
corresponding timer in the switch system is called the response timeout timer of RADIUS servers.
You can use the timer response-timeout command to set the timeout time of this timer, and if the
Number of users
Table 1-6 lists the recommended intervals for
Real-time accounting interval
3
6
12
≥15
1-64