Renesas RL78 Series User Manual page 907

RL78/G1D
Edition
Rev.1.00
Change of description in 1.1 Features
Addition of description in 1.1 Features
Change of Figure 1-1. Part Number, Memory Size, and Package of RL78/G1D
Change of Table 1-1. List of Ordering Part Numbers
Change of 1.3 Pin Configuration (Top View)
Change of 1.4 Pin Identification
Change of 1.5 Block Diagram
Change of 1.6 Outline of Functions
Change of description in 2.1 Connection Pins of MCU and RF Transceiver
Change of Table 2-2. Pins Externally Connected on User Board
Change of description in 2.3 Initial Settings of Unused Internal Pins of MCU
Change of description in 2.4 Operation Clock of Bluetooth Low Energy
Change of Table 2-4. Clock Resonator Connection (Using on-chip low-speed oscillator
in the RF unit as a slow clock.)
Change of Figure 2-1. Clock Configuration (Using on-chip low-speed oscillator in the
RF unit as a slow clock.)
Change of Table 2-5. Clock Resonator Connection (Using PCLBUZ0 of the MCU
block as a slow clock.)
Change of Figure 2-2. Clock Configuration (Using PCLBUZ0 of the MCU block as a
slow clock.)
Change of description in 2.5 Power Configuration
Change of Figure 2-3. Power Configuration
Change of 3.1 Pin Functions
Change of 3.2 Functions Other than Port Pins
Change of Table 3-3. Connection of Unused Pins
Addition of description in 5.2.6 Port 6
Addition and change of descriptions
Change of Table 26-9. Example of Signature Data
Addition and change of descriptions
Change of PACKAGE DRAWINGS
First Edition issued
Rev.0.50
R01UH0515EJ0120 Rev.1.20
Dec 16, 2016
Description
APPENDIX A REVISION HISTORY
Chapter
CHAPTER 1 OUTLINE
CHAPTER 2
CONNECTION
BETWEEN MCU AND
RF TRANSCEIVER
CHAPTER 3 PIN
FUNCTIONS
CHAPTER 5 PORT
FUNCTIONS
CHAPTER 15 RF
TRANSCEIVER
CHAPTER 26 FLASH
MEMORY
CHAPTER 30
ELECTRICAL
SPECIFICATIONS
CHAPTER 31
PACKAGE DRAWINGS
Throughout
(7/7)
886