Renesas RL78 Series User Manual page 756

RL78/G1D
23.2 Registers Used by Safety Functions
The safety functions use the following registers for each function.
● Flash memory CRC control register (CRC0CTL)
● Flash memory CRC operation result register (PGCRCL)
● CRC input register (CRCIN)
● CRC data register (CRCD)
● RAM parity error control register (RPECTL)
● Invalid memory access detection control register (IAWCTL)
● Timer input select register 0 (TIS0)
● A/D test register (ADTES)
The content of each register is described in 23.3 Operation of Safety Functions.
23.3 Operation of Safety Functions
23.3.1 Flash memory CRC operation function (high-speed CRC)
The IEC60730 standard mandates the checking of data in the flash memory, and recommends using CRC to do it. The
high-speed CRC provided in the RL78/G1D can be used to check the entire code flash memory area during the
initialization routine. The high-speed CRC can be executed only when the program is allocated on the RAM and in the
HALT mode of the main system clock.
The high-speed CRC performs an operation by reading 32-bit data per clock from the flash memory while stopping the
CPU.This function therefore can finish a check in a shorter time (for example, 1024 µs@32 MHz with 128-KB flash
memory).
The CRC generator polynomial used complies with "X
The high-speed CRC operates in MSB first order from bit 31 to bit 0.
Caution The CRC operation result might differ during on-chip debugging because the monitor program is
allocated.
Remark The operation result is different between the high-speed CRC and the general CRC, because the general
CRC operates in LSB first order.
23.3.1.1 Flash memory CRC control register (CRC0CTL)
This register is used to control the operation of the high-speed CRC ALU, as well as to specify the operation range.
The CRC0CTL register can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
R01UH0515EJ0120 Rev.1.20
Dec 16, 2016
Register
CHAPTER 23 SAFETY FUNCTIONS
Each Function of Safety Function
Flash memory CRC operation function
(high-speed CRC)
CRC operation function
(general-purpose CRC)
RAM parity error detection function
RAM guard function
SFR guard function
Invalid memory access detection function
Frequency detection function
A/D test function
16 12 5
+ X + X + 1" of CRC-16-CCITT.
735