Renesas RL78 Series User Manual page 397

RL78/G1D
13.3 Registers Controlling Serial Array Unit
Serial array unit is controlled by the following registers.
● Peripheral enable register 0 (PER0)
● Serial clock select register m (SPSm)
● Serial mode register mn (SMRmn)
● Serial communication operation setting register mn (SCRmn)
● Serial data register mn (SDRmn)
● Serial flag clear trigger register mn (SIRmn)
● Serial status register mn (SSRmn)
● Serial channel start register m (SSm)
● Serial channel stop register m (STm)
● Serial channel enable status register m (SEm)
● Serial output enable register m (SOEm)
● Serial output level register m (SOLm)
● Serial output register m (SOm)
● Serial standby control register m (SSCm)
● Noise filter enable register 0 (NFEN0)
● Port input mode registers 0, 1 (PIM0, PIM1)
● Port output mode registers 0, 1 (POM0, POM1)
● Port mode control register 0 (PMC0)
● Port mode registers 0, 1, 7 (PM0, PM1, PM7)
● Port registers 0, 1, 7 (P0, P1, P7)
Remark m: Unit number (m = 0, 1), n: Channel number (n = 0 to 3 for m = 0, n = 1 for m = 1)
R01UH0515EJ0120 Rev.1.20
Dec 16, 2016
CHAPTER 13 SERIAL ARRAY UNIT
376