Renesas RL78 Series User Manual page 354

16-bit single-chip microcontrollers

Hide thumbs Also See for RL78 Series:

Table of Contents

Cautions 8. If the ADISS bit is set to 1, the internal reference voltage (1.45 V) cannot be used for the +

9. Do not set the ADISS bit to 1 when shifting to STOP mode, or to HALT mode while the

R01UH0515EJ0120 Rev.1.20

Dec 16, 2016

side reference voltage. After the ADISS bit is set to 1, the initial conversion result cannot

For the setting flow, see 12.7.4

voltage/internal reference voltage is selected (example for software trigger mode and one-

shot conversion mode).

CPU is operating on the subsystem clock. When the ADISS bit is set to 1, the A/D

converter reference voltage current (I

characteristics will be added.

CHAPTER 12 A/D CONVERTER

Setup when temperature sensor output

) indicated in 30.4.2

Supply current

Rl78/g1d R5f11agg R5f11agh R5f11agj