Renesas RL78 Series User Manual page 901

RL78/G1D
A.2 Revision History of Preceding Editions
Here is the revision history of the preceding editions. Chapter indicates the chapter of each edition.
Edition
Rev.1.10
Change of description in 1.1 Features
Change of 1.6 Outline of Functions
Change of description in 2.1 Connection Pins of MCU and RF Transceiver
Change of Table 2-1. Internal Pin Connection
Change of Table 2-2. Pins Externally Connected on User Board
Change of description in Operation Clock of Bluetooth Low Energy
Change of Figure 2-3.(b) When DC-DC converter is not used
Change of description in 3.1 Pin Functions
Change of description in 3.2 Functions Other than Port Pins
Change of Table 3-3. Connection of Unused Pins
Change of Table 5-1. Port Configuration
Change of description in 5.2.8 Port 12
Change of description in 5.2.10 Port 14
Change of Table 5-3. PMxx, Pxx, PUxx, PIMxx, POMxx, PMCxx registers and the bits
Addition of note 4 to Figure 5-2. Format of Port Register
Change of Figure 5-6. Format of Port Mode Control Register
Change of caution 1 of Figure 5-7. Format of A/D Port Configuration Register (ADPC)
Change of Figure 5-8. Format of Peripheral I/O Redirection Register (PIOR)
Change of 5.4.5 (3) Setting procedure when using I/O pins of IIC00 and IIC20
functions with a different potential (1.8 V, 2.5 V, 3 V)
Change of remark of Figure 5-10. Basic Configuration of Output Circuit for Pins
Change of Table 5-5. Setting Examples of Registers and Output Latches When Using
Alternate Function
Addition of description in 6.1(1) <2> High-speed on-chip oscillator
Change of description in 6.1 (4) RF transceiver reference clock
Addition of description to caution 6 in Figure 6-4. Format of Clock Operation Status
Control Register (CSC)
Change of description in 6.4.5 RF reference clock oscillator
Addition of caution to 6.6.2 Example of setting X1 oscillation clock
Addition of table to 6.6.2 Example of setting X1 oscillation clock
Change of description in 6.6.3 Example of setting XT1 oscillation clock
Change of Table 6-4. Changing CPU Clock
Addition of description in 6.6.7 Conditions before clock oscillation is stopped
Addition of caution 3 in 6.7 Resonator and Oscillator Constants, and Change of Figure
6-17(c) RF reference clock oscillation
Addition of note 4 to 6.1(1) X1 oscillation
Deletion of note 2 in 6.1(1) X1 oscillation
Addition of 6.1(3) RF reference clock oscillation: Crystal resonator
R01UH0515EJ0120 Rev.1.20
Dec 16, 2016
Description
APPENDIX A REVISION HISTORY
Chapter
CHAPTER 1 OUTLINE
CHAPTER 2
CONNECTION
BETWEEN MCU AND RF
TRANSCEIVER
CHAPTER 3 PIN
FUNCTIONS
CHAPTER 5 PORT
FUNCTIONS
CHAPTER 6 CLOCK
GENERATOR
(1/7)
880