RL78/G1D
Notes 1. Bit 11 is a read-only bit and fixed to 0. Writing to this bit is ignored.
2. In one-count mode, interrupt output (INTTMmn) when starting a count operation and TOmn output are
not controlled.
3. If the start trigger (TSmn = 1) is issued during operation, the counter is initialized, and recounting is
started (does not occur the interrupt request).
Remark m: Unit number (m = 0), n: Channel number (n = 0 to 7)
R01UH0515EJ0120 Rev.1.20
Dec 16, 2016
CHAPTER 7 TIMER ARRAY UNIT
178