RL78/G1D
Remarks 1. m: Unit number (m = 0, 1), n: Channel number (n = 0), r: IIC number (r = 00, 20), mn = 00, 10
2.
: Setting is fixed in the IIC mode,
×: Bit that cannot be used in this mode (set to the initial value when not used in any mode)
0/1: Set to 0 or 1 depending on the usage of the user
R01UH0515EJ0120 Rev.1.20
Dec 16, 2016
CHAPTER 13 SERIAL ARRAY UNIT
: Setting disabled (set to the initial value)
502