Setting The Job - Leica FlexLine plus User Manual

6.3
Description
Access
Select Job
Job list
Recorded data
Next step
FlexLine plus, Programs - Getting Started

Setting the Job

All data is saved in Jobs, like file directories. Jobs contain measurement data of
different types, for example measurements, codes, fixpoints or stations. Jobs are indi-
vidually manageable and can be exported, edited or deleted separately.
Select F1 Set Job in Config. screen.
Field Description
Job Name of an existing job to be used.
Name of operator, if entered.
Operator
Date the selected job was created.
Date
Time the selected job was created.
Time
Next step
• Either, press Cont to continue with the selected job.
• Or, press List to select a job.
• Or, press New to open the Enter Job Data screen and create a new job.
Column Description
First column Name of an existing job.
Second column Date the jobs were created.
Once a job is set up, all subsequent recorded data will be stored in this job.
If no job was defined and a program was started, or if in Q-Survey and a measurement
was recorded, then the system automatically creates a new job and names it "Default".
Press Cont to confirm the job and return to the Config. screen.
New
To create a new job.
List
To display the list of available jobs.
Search
To search for a job. Refer to "3.6
Pointsearch".
▼ Name and ▲ Name
To sort the list according to ascending
or descending job names.
▼ Date and ▲ Date
To sort the list according to ascending
or descending job creation dates.
57