Measure Line & Offset - Leica TS03 User Manual

7.5.4
Description
86
Key Description
NewBL To define a new base line.
Shift=0 To reset all offset values to 0.
Segment To subdivide a reference line into a definable number of seg-
ments and stake out the new points on the reference line.
Description of fields
Field Option
Length Display only
Ref. Height Point 1
Point 2
Interpolated
No Height
Offset Display only
Line Display only
Height Display only
Rotate Display only
Next step
Select a softkey option, Meas Pt, Setout or
app.
Measure Line & Offset
The Measure Line & Offset subapp calculates from measurements or coordi-
nates, longitudinal offsets, parallel offsets and height differences of the target
point relative to the reference line.
Description
Length of the base line.
Height differences are computed relative to
the height of the first reference point.
Height differences are computed relative to
the height of the second reference point.
Height differences are computed along the
reference line.
Height differences are not computed or
shown.
Parallel offset of the reference line relative to
the base line (P1-P2). Available on page 2/2
for TS03 or on page Shifts for TS07.
Positive values are to the right of the base
line.
Longitudinal offset of the start point, refer-
ence point (P3), of the reference line in the
direction of base point 2. Available on page
2/2 for TS03 or on page Shifts for TS07.
Positive values are towards base point 2.
Height offset of the reference line to the
selected reference height. Available on page
2/2 for TS03 or on page Shifts for TS07.
Positive values are higher than the selected
reference height.
Rotation of the reference line clockwise
around the reference point (P3). Available on
page 2/2 for TS03 or on page Shifts for
TS07.
Segment, to proceed to a sub-
Apps