Table of Contents
Advertisement
Description
3
Description
3.1
Function
The illumination for the GLOW800 is a xenon lamp and is located in
the Leica surgical microscope. This lamp provides visible and near
infrared light. This light cannot be observed through the surgical
microscope, but it is recorded using a special camera and visualized
on the monitor mounted on the Leica surgical microscope.
Using the handles or via user settings you can switch between
visible and GLOW800 light.
Please refer to the user manual of the corresponding Leica
surgical microscope.
3.2
Design
GLOW800 is an accessory to the Surgical Operating Microscope and
is incorporated into the M530 optics carrier.
GLOW800 is composed of the following components:
A GLOW800 ULT, see chapter 3.2.1, position (1)
B GLOW800 VPU, see chapter 3.2.2, position (3)
C GLOW800 filters, see chapter 3.2.2, in position (4)
3.2.1
M530 optics carrier with GLOW800
1 GLOW800 ULT
2 Image Injection module Leica CaptiView (optional)
3 Fluorescence module Leica FL400, FL560 or FL400/560 (optional)
4 M530 Optics Carrier
4
1
4
1 Interface for lateral left and right assistant
2 Interface for back/opposite assistant, 360° rotatable
3 Back assistant fine focus
4 Switch lateral or back assistant
5 Interface main surgeon, 360° rotatable
• GLOW800 is built into the housing of the ULT530
• Integrated cameras for visible light and for NIR light
(fluorescence), one common remote controlled fine focus for
both
1
2
3
4
GLOW800 / Ref. 10 747 241 / Version 00
5
3
2
Advertisement
Table of Contents
