Starting Reference Line; Manually Entering A Reference Line/Arc - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

Access step-by-step

The Reference page

Reference Line

Starting Reference Line

A reference line/arc can be defined by manually entering known parameters.

The line/arc is only temporary and is not stored when the program is quit or closed.

Refer to "42.2 Accessing Reference Line" to access the Begin screen.

CONT (F1) to access REFLINE Choose Task & Reference Line.

REFLINE Choose Task & Reference Line, Reference page.

Select <Ref to Use: Manually Enter>.

This screen contains the Reference page and the Map page. The explanations for the

softkeys given below are valid as indicated. The fields available depend on the options

chosen for <Task:> and <Method:> in this screen.

For all point fields, the MapView interactive display on the Map page can be used to select

the desired point. Refer to "34 MapView Interactive Display Feature" for information on

the functionality and softkeys available.