Table of Contents
Advertisement
5.4
Description
5.4.1
Smart Targeting
using the
Rugby 840, step-by-
step
Rugby 840, Applications
Applications - Rugby 840 and the Rod Eye 180 Digital RF receiver
The Rugby 840 and the Rod Eye 180, Digital Receiver RF, contain radio devices which
allow for special features when used together.
Smart Target (Automatic Slope Catching)
3
1.5 s
2
004803_001
Step Description
1.
Set up the Rugby 840 at the base of a slope with the X-axis pointing in the
direction of the slope.
2.
At the base of the slope, adjust the height of the receiver on the rod until the
on-grade (centre-line) position is indicated on the receiver by:
• the centre bar
• the green flashing LED
• a solid audio tone
• the digital display
3.
Move to the top of the slope and press the laser man button for 1.5 seconds
to start the smart targeting process. The receiver shows SMT, then XSC for
X-axis slope catching.
4.
The Rugby 840 searches for the receiver until the on-grade position is found.
Once the on-grade position, the receiver will flash all three LEDs simultane-
ously one time and the receiver returns to normal operation.
5.
After this signal the receiver can be moved and used as normal. The sloped axis
is in Manual mode and should be checked from time to time to ensure the
Rugby 840 has not moved.
X
α
1
SMT
4
XSC
α
29
Hide quick links:
Advertisement
Table of Contents
