Target Offset; Overview - Leica TS01 User Manual

Next step
Compute
Next step
7.4
7.4.1
Access
Apps
Mode Field
hr
Polar Dist:
Hz:
hr
Press Value to find an existing point with the pointsearch or enter ENZ
coordinates for a new point. Press OK to continue the set out.
Key Description
Store To save the displayed values without executing a distance
measurment.
Shift To enter the polar set out screen.
To enter the set out screen for coordinates.
<--> To switch to the navigation screen or to use horizonal and
vertical angle for guidance.
HD To measure a distance.
Coord To measure the coordinates.
Description of fields
Mode Field
Cartesian dE:
dN:
dZ:
Hz:
dHz:
Polar Dist:
Hz:
hr
Either, press Store to store the set out point and to continue with the
•
next set out point.
Or, press to exit the application.
•

Target Offset

Overview

1. Select Apps from the Main Menu.
2. Select OffSet.
3. Complete app pre-settings. Refer to
Description
Height of the reflector.
Distance to the set out point.
Horizontal angle to the set out point.
Height of the reflector.
Description
Easting offset: Positive if set out point is to
the right of the measured point.
Northing offset: Positive if set out point is
further away than the measured point.
Height offset: Positive if set out point is
higher than the measured point.
Computed horizontal angle.
Angle offset: Positive if set out point is to
the right of the measured point.
Distance to the set out point.
Horizontal angle to the set out point.
Height of the reflector.
6 Apps - Getting Started.
51