Battery For The Ts Instrument; Data Storage - Leica TS03 User Manual

4.2.2
Change the battery
step-by-step
4.3
Description
Operation

Battery for the TS Instrument

2
0016339_001
4 4
6
0016340_001
1. Face the instrument so that the vertical drive screw is on the left.
The battery compartment is below the vertical drive. Turn the knob to
the vertical position, opening the lid of the battery compartment.
2. Pull out the battery housing.
3. Pull the battery out of the battery housing.
4. At the top of the battery is a notch which corresponds to the inner
surface of the battery housing. This notch helps you to place the
battery correctly.
Place the battery into the battery housing, ensuring that the contacts
are facing outward. Click the battery into position.
5. Place the battery housing into the battery compartment. Push the
battery housing in until it fits completely into the battery compart-
ment.
6. Turn the knob to lock the battery compartment. Ensure that the knob
is returned to its original horizontal position.

Data Storage

An internal memory is included in all instruments. The FlexField firmware stores
all data in jobs in a database in the internal memory.
Data can be transferred from the internal memory to a computer or other
device via:
3
5
39