Stakeout - Leica TS01 User Manual

Define Refline(1)
Define Refline(2)
7.9.3
Description
Access
Apps
Define offset values.
Key Description
OK To confirm the measured or entered values and continue the
process.
To display the next softkey level and fields.
Description of fields
Field Option
Hz: Display only
HD: Display only
VD: Display only
Slope: Display only
L-Offset: Editable Field
T-Offset: Editable Field
H-Offset: Editable Field
Rotate: Editable Field

Stakeout

Calculates the difference between a measured point and the calculated point.
The orthogonal differences are displayed.
Example orthogonal stakeout
P0
P1
TSOX_038
Select Reference Line Setout from the Reference Line menu.
Description
Azimuth of a reference line connecting the
start point and the end point.
Horizontal distance between the start point
and the end point.
Vertical distance between the start point and
the end point.
Difference in height between the start point
and the end point.
Longitudinal offset of the start point, refer-
ence point (P3), of the reference line in the
direction of base point 2. Positive values are
towards base point 2.
Parallel offset of the reference line relative
to the base line (P1-P2). Positive values are
to the right of the base line.
Height offset of the reference line to the
selected reference height. Positive values are
higher than the selected reference height.
Rotation of the reference line clockwise
around the reference point (P3).
P2
P0 Instrument station
P1 Start point
P4
P2 End point
a
P3 Stake out point
b
P3
P4 Measured point
a
D Parallel offset
b
D Longitudinal offset
63