Set Web-Authentication Vlan - Alaxala AX6700S Software Manual

6. Web Authentication

set web-authentication vlan

Changes the VLAN to which a Web-authenticated user belongs.
To apply the change to the authentication information, execute the
command.
Syntax
set web-authentication vlan
Input mode
Administrator mode
Parameters
<user name>
Specify the name of the user for which the VLAN is being changed.
Only alphanumeric characters can be used, and the characters are case sensitive. Specify a
name with 1 to 16 characters.
<vlan id>
Specify the VLAN ID of the VLAN to be changed.
For details about the specifiable range of values, see Specifiable values for parameters. Note
that the default VLAN (VLAN ID = 1) cannot be specified for this command.
Example
When changing the VLAN to which user
# set web-authentication vlan USER01 30
Display items
None
Impact on communication
None
Response messages
Table 6-3: List of response messages for the set web-authentication vlan command
Message
Can't execute this command in standby system.
Can't execute.
Now another user is using WA command, please try
again.
Unknown user '<user name>'.
WA is not configured.
Notes
• This command cannot be used concurrently by multiple users.
• The settings are available as authentication information only after the
web-authentication
138
<user name> <vlan id>
belongs to 30
USER01
This command cannot be executed on a standby system.
The command could not be executed. Re-execute the command.
Another user is using a command for the Web authentication
functionality. Wait a while, and then retry the operation.
The specified user has not been registered.
The Web authentication functionality is not enabled. Check the
configuration.
command has been executed.
commit web-authentication
Description
commit