Table of Contents
Advertisement
You can enter „100-digit long Short-Code Dial Numbers" with the PC
software COMtools. These can contain letters and tokens to enter pre-
defined messages to pagers.
Enter public Short-Code Dial Numbers
b 7 Q 31 m r
public
password
Enter private Short-Code Dial Numbers
b 7 Q 30
your
public
telephone
password
Enter Emergency Short-Code Dial Numbers
b 7 O 32
secret
password
The emergency call priority function (configured in COMset)
provides an exchange line in any circumstance for an emer-
gency Short-Code Dial Number call to an external number. If all
To be reminded of single or recurrent dates by your own telephone, you
can use the wake-up function.
Your telephone will ring at the configured time for 1 minute. If you accept
this call, you will hear the Music on Hold.
Single/Repetitive Wake-up: The Wake-up time can be activated for a
one-time or repetitive function. If you like to get a Wake-up call always
at the same time, you have to configure „repetitive Wake-up". The
Wake-up function will be active until you switch it off. Once configured,
the Wake-up time will be stored until you configure a different one.
Example: You have activated the Wake-up time „Monday to Friday at
12.30 clock". If you did this activation on a Sunday evening for „Wake-
up once", you will be waked up on the following Monday at 12.30 clock.
The Wake-up function will be deactivated then. If you have configured
the same Wake-up time repetitive, you will be waked-up also from Tues-
day until Friday at 12.30 clock (every week, until Wake-up is deacti-
vated).
The Wake-up times can also be configured with the PC software
COMtools
(p.
60).
Short-Code
20-digit max. number (without
Dial Number
Exchange Line Access Number „0"!)
or
l r
Short-Code
20-digit max. number (without
Dial Number
Exchange Line Access Number „0"!)
or
i r
Short-Code
20-digit maximum number (without
Dial Number
Exchange Line Access Number „0"!)
or
You like to use the Wake-up Function of the PBX
#
Enter public Short-Code Dial Numbers
#
Delete public Short-Code Dial Number
#
Enter telephone number in the private
#
Delete telephone number out of private
#
Enter the Number into the Short-Code
#
exchange lines are busy, an active call will be terminated in favour of
the emergency call. Please do not enter general Short-Code Dial Num-
bers here.
On each telephone one Wake-up time can be configured.
After a power failure the time information is lost. In this case automatic
switching and the Wake-up function will not be performed. After adjust-
ing the time by the programming sequence on
external call the functions will be active again (you can configure in
COMset an automatic call to a number e.g. your own number for this
purpose).
Settings
Short-Code Dial Number memory
short-dial number memory
Dial Memory
Delete Number from Short-Code Dial
p. 47
or by an outbound
35
Memory
Advertisement
Table of Contents
