Service-Description Attribute - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

nas-port-type ethernet

Service-Description Attribute

aaa profile
service-description
Copyright © 2010, Juniper Networks, Inc.
Use to specify the RADIUS NAS-Port-Type attribute (61) for Ethernet interfaces. You
can set the attribute to:
value—Number in the range 0–65535
cable
iapp—IAPP
wireless-1x-ev—Wireless 1xEV
wireless-80211—Wireless 802.11
wireless-cdma—Wireless CDMA
wireless-other
wireless-umts—Wireless UMTS
Example
host1(config-aaa-profile)#nas-port-type ethernet wireless-80211
Use the no version to remove the NAS-Port-Type setting for Ethernet interfaces.
See nas-port-type ethernet
You can specify a service description that will be associated with an AAA profile. The
description can then be exported through RADIUS by the Service-Description attribute
(RADIUS attribute 26-53) in AAA profiles.
To set the Service-Description attribute:
Create the AAA profile.
1.
host1(config)#aaa profile xyzCorpPro2
Set the Service-Description attribute.
2.
host1(config-aaa-profile)#service-description bos-xyzcorp
Use to create and configure a AAA profile.
Example
host1(config)#aaa profile xyzCorpPro2
Use the no version to delete the AAA profile.
See aaa profile
Chapter 1: Configuring Remote Access
67