Default-Router - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

default-router

Syntax
Release Information
Description
Options
Mode
500
default-router ipAddressPrimary [ ipAddressSecondary ]
no default-router
Command introduced before JunosE Release 7.1.0.
Specifies the IP address of the router that the subscriber's computer will use for traffic
destined for locations beyond the local subnet. The default router must be on the same
subnet as the local server pool addresses configured with the network command. The
no version removes the association between the address pool and the router.
ipAddressPrimary—IP address of preferred router
ipAddressSecondary—IP address of secondary router
DHCP Local Pool Configuration
Copyright © 2010, Juniper Networks, Inc.