L2Tp Checksum - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2tp checksum

Syntax
Release Information
Description
Mode
1152
[ no ] l2tp checksum
Command introduced before JunosE Release 7.1.0.
Enables the generation of a UDP data integrity checksum in data packets sent to an L2TP
peer. The default setting is disabled. The no version disables the generation of the
checksums.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.