Show Ipv6 Rip Peer - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ipv6 rip peer

show ipv6 rip peer
Displays a summary of the observed RIPng peers, or specific information about a peer when a peer
address is provided.
show ipv6 rip peer [ipv6_addresss]
Syntax Definitions
ipv6_addresss
Defaults
N/A.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify a peer, all IPv6 RIP peers are displayed.
Examples
-> show ipv6 peer
Address
-----------------------------+-------------+--------+----------
fe80::200:39ff:fe1f:710c
fe80::2d0:95ff:fe12:da40
fe80::2d0:95ff:fe12:da40
fe80::2d0:95ff:fe6a:5d41
-> show ipv6 rip peer fe80::2d0:95ff:fe12:da40
Peer#1 address
Seen on interface
Last Update
Received packets
Received bad packets
Received routes
Received bad routes
Peer#2 address
Seen on interface
Last Update
Received packets
Received bad packets
Received routes
Received bad routes
page 11-90
IPv6 address of the peer.
Seen on
Interface
vlan172
bkbone20
vlan150
nssa23
= fe80::2d0:95ff:fe12:da40,
= bkbone20,
= 8 secs,
= 33,
= 0
= 5,
= 0
= fe80::2d0:95ff:fe12:da40,
= vlan150,
= 1 secs,
= 27,
= 0
= 2,
= 0
Packets Last
Recv Update
23 20
33 2
26 25
20 25
OmniSwitch CLI Reference Guide
IPv6 Commands
March 2011