Table 21: Show Per-Peer-Queuing Output Fields - Alcatel-Lucent 7450 System Management Manual

Security Commands
Sample Output
A:ALA-7# show system security password-options
===============================================================================
Password Options
===============================================================================
Password aging in days
Time required between password changes
Number of invalid attempts permitted per login
Time in minutes per login attempt
Lockout period (when threshold breached)
Authentication order
User password history length
Accepted password length
Credits for each character type
Required character types
Minimum number different character types
Required distance with previous password
Allow consecutively repeating a character
Allow passwords containing username
Palindrome allowed
===============================================================================
A:ALA-7#
per-peer-queuing
Syntax per-peer-queuing
Context show>system>security
Description
This command enables or disables CPMCFM hardware queuing per peer. TTL security only operates
when per-peer-queuing is enabled.
Output Per-Peer-Queuing Output — The following table describes per-peer-queuing output fields.

Table 21: Show Per-Peer-Queuing Output Fields

Page 260
Label
Per Peer Queuing
Total Num of
Queues
Num of Queues In
Use
Displays the status (enabled or disabled) of CPM hardware queuing
per peer.
Displays the total number of hardware queues.
Displays the total number of hardware queues in use.
7450 ESS System Mangement Guide
: none
: 0d 00:10:00
: 3
: 5
: 10
: radius tacplus local
: disabled
: 6..56 characters
: none
: none
: 0
: 5
: always
: yes
: no
Description