Rrm - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

File Management Commands

rrm

Removes a file from a secondary CMM in a switch or from a non-primary switch in a stack.
rrm slot filepath
Syntax Definitions
slot
filepath
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855-U24X, 9000E
Usage Guidelines
•
On OmniSwitch chassis-based switches this command deletes any file from the secondary CMM.
•
On OmniSwitch stackable switches this command deletes a file from any non-primary switch. You
must specify the slot number on these switches.
Examples
-> rrm 5 /flash/boot.params
Release History
Release 6.1; command was introduced.
Related Commands
rcp
rls
MIB Objects
chasSupervisionRfsLsTable
alcatelIND1ChassisSupervisionRfsCommands
chasSupervisionRfsCommandsSlot
chasSupervisionRfsCommandsCommand
chasSupervisionRfsCommandsSrcFileName
OmniSwitch CLI Reference Guide
The slot number of the non-primary switch in a stack.
The name and path of the file to be deleted.
Copies a file from a secondary CMM to a primary CMMor from a non-
primary switch to a primary switch in a stack.
Displays the content of a non primary CMM in a switch or anon-pri-
mary switch in a stack.
June 2012 page 58-35