Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3584

http port
Changes the port number for the embedded Web server in the switch.
[ip] http port {default | port}
Syntax Definitions
ip
default
port
Defaults
parameter
port
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
All WebView sessions must be terminated before entering this command.
Examples
-> http port 1025
-> http port default
Release History
Release 6.1; command was introduced.
Related Commands
http server
show http
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaIND1WebMgtHttpPort
page 59-4
Optional syntax.
Restores the port to its default (80) value.
The desired port number for the embedded Web server. The number
must be in the range 0 to 65535; well-known port numbers cannot be
configured.
default
80
Enables/disables web management on the switch.
Displays web management configuration information.
Web Management Commands
OmniSwitch CLI Reference Guide June 2012