Rls - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

rls

Displays the content of a non primary CMM in a switch or a non-primary switch in a stack.
rls slot directory [file_name]
Syntax Definitions
slot
directory
file_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855-U24X, 9000E
Usage Guidelines
•
On OmniSwitch chassis-based switches this command displays directory content on the secondary
CMM.
•
On OmniSwitch stackable switches, this command displays directory content on any non-primary
switch in a stack. You must specify the slot number on these switches.
Examples
On OmniSwitch 6850 Series switches:
-> rls 5 /flash
-rw 324
drw 2048
drw 2048
-rw 64000
-rw 29
-rw 3369019
-rw 394632
-rw 511096
-rw 511096
drw 2048
drw 2048
-rw 256
Release History
Release 6.1; command was introduced.
page 58-36
The slot number of the non-primary switch in a stack. This parameter is
only required on a stack of switches.
The name of the directory on the non-primary CMM or switch.
The file to be displayed on the non-primary CMM or switch.
Mar 3 11:32 boot.params
Mar 3 11:32 certified/
Mar 3 11:32 working/
Mar 7 09:54 swlog1.log
Feb 5 2023 policy.cfg
Mar 3 11:20 cs_system.pmd
Jan 1 1980 bootrom.bin
Jan 1 1980 miniboot.backup
Jan 1 1980 miniboot.default
Feb 25 06:34 network/
Mar 3 11:29 switch/
Mar 3 11:29 random-seed
File Management Commands
OmniSwitch CLI Reference Guide June 2012