Timer Realtime-Accounting - H3C s3600 series Command Manual

System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer quiet 10

timer realtime-accounting

Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
RADIUS scheme view
Parameters
minutes: Real-time accounting interval, in minutes. It ranges from 3 to 60 and must be a multiple of 3.
Description
Use the timer realtime-accounting command to set the real-time accounting interval.
Use the undo timer realtime-accounting command to restore the default real-time accounting
interval.
By default, this interval is 12 minutes.
Note that:
To control the interval at which users are charged in real time, you can set the real-time accounting
interval. After the setting, the switch periodically sends online users' accounting information to the
RADIUS server at the set interval.
The setting of the real-time accounting interval depends, to some degree, on the performance of
the switch and the RADIUS server. The higher the performance of the switch and the RADIUS
server is, the shorter the interval can be. It is recommended to set the interval as long as possible
when the number of users is relatively great (≥1000).
different numbers of users.
Table 1-6 Numbers of users and recommended intervals
1 to 99
100 to 499
500 to 999
≥1000
Related commands: retry realtime-accounting, radius scheme.
Examples
# Set the real-time accounting interval of RADIUS scheme radius1 to 51 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
Number of users
Table 1-6 lists the recommended intervals for
Real-time accounting interval
3
6
12
≥15
1-53