Configuring Accounting Methods For An Isp Domain - H3C S5830V2 Security Configuration Manual

Step
6. Specify the authorization
method for login users.

Configuring accounting methods for an ISP domain

Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users, but it has a lower priority than the
accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
Login users who use FTP services do not support accounting.
•
Local accounting does not provide statistics for charging. It only counts and controls the number of
•
concurrent users who use the same local user account. The threshold is configured by using the
access-limit enable command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step
Enter system view.
1.
2. Enter ISP domain view.
3. Specify the default
accounting method for all
types of users.
4. Specify the command
accounting method.
5. Specify the accounting
method for LAN users.
Command
authorization login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
Command
system-view
domain isp-name
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
accounting command hwtacacs-scheme
hwtacacs-scheme-name
accounting lan-access { local [ none ] |
none | radius-scheme radius-scheme-name
[ local ] [ none ] }
43
Remarks
By default, the default
authorization method is used
for login users.
The none keyword is not
supported in FIPS mode.
Remarks
N/A
N/A
By default, the accounting
method is local.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for LAN users.
The none keyword is not
supported in FIPS mode.