Accounting Default - H3C S5120-SI Series Command Reference Manual

Examples
# Set a limit of 500 user connections for ISP domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] access-limit enable 500

accounting default

Syntax
accounting default { local | none | radius-scheme radius-scheme-name [ local ] }
undo accounting default
View
ISP domain view
Default Level
2: System level
Parameters
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
Description
Use the accounting default command to configure the default accounting method for all types of
users.
Use the undo accounting default command to restore the default.
By default, the accounting method is local.
Note that:
The RADIUS scheme specified for the current ISP domain must have been configured.
The accounting method configured with the accounting default command is for all types of users
and has a priority lower than that for a specific access mode.
Local accounting is only for managing the local user connection number; it does not provide the
statistics function. The local user connection number management is only for local accounting; it
does not affect local authentication and authorization.
Related commands: authentication default, authorization default, radius scheme.
Examples
# Configure the default ISP domain system to use the local accounting method for all types of users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting default local
1-3