Table of Contents
Advertisement
2.3
Locator Setup and Information
Locator settings
The i Series Locators offer a range of settings which the operator can adjust to their own
preference. It also displays additional service and contact information as detailed.
Setting
EST
H.Z
VOL
HLD
SSI
CST
M/I
CAL
CON
TEL
I.D
PWR
SR#
VER
DIGICAT 500i/550i, How to Use the Locator
Description
Performs a function check on the locators hardware and software,
displaying PAS if the Locator is within predefined tolerance or ERR if the
locator it is not.
Switches hazard zone on or off.
Adjust volume level (0 - 10).
Adjust peak hold duration (0 - 5 seconds).
Displays a numeric signal strength indicator.
Adjusts display's contrast (0 - 15).
Displays unit of measurement.
Displays the next service date DD/MM/YY.
Displays supplier/company name.
Displays supplier/company telephone number.
Displays the operator's name.
Displays the power mode regional setting. Refer to "Appendix B World
Frequency Zones" for more information.
Displays unit serial number.
Displays software version
15
Advertisement
Table of Contents
