Area Plane (Tilt) & Volume - Leica Builder T User Manual

Application Programs, for Builder R, RM,
M power and RM power
10.6
Description
Diagram
Area plane (tilt) & Volume
The application program Area with methods 'plane' and 'tilt' is used to compute area
size of areas with max. 50 boundary points connected by straights. Furthermore a
volume with constant height can be calculated.
The calculated area is projected onto the horizontal plane or projected onto the tilted
reference plane depending on the chosen method. The tilted reference plane is com-
puted and updated automatically after each measurement. It is determined out of all
current boundary points by those three points that stretch the largest area.
The boundary points have to be measured ordered, either in clockwise or anticlock-
wise direction.
P2
P1
P0
Builder
P3
P0 Station
P4
P1 Start point
P2 Target point
P3 Target point
P4 Target point
112