Setting The Time - Alaxala AX6300S Quick Start Manual

3. Required Operations When Installing a Switch

3.6 Setting the time

Specify the time zone and the current time.
The following example shows the procedure for setting the time zone as Japan and
the time to 15:30 on January 20, 2009.
NOTE
This completes the procedures necessary for the initial installation, including setting
the time, setting the password for administrator mode, adding a new user ID, and
deleting the default user ID.
NOTE
24
If the configuration is changed, the
symbol disappears when the configuration is saved.
For details about operation management and configuration settings that are
performed after initial installation, see the manuals listed in 4.1 Operation
management and configuration settings.
symbol appears before the prompt. This
!