Mac-Authentication System-Auth-Control - Alaxala AX3640S Software Manual

mac-authentication system-auth-control

Starts the MAC-based authentication daemon, and enables MAC-based authentication.
Note that if the
MAC-based authentication daemon stops.
Syntax
To set information:
mac-authentication system-auth-control
To delete information:
no mac-authentication system-auth-control
Input mode
(config)
Parameters
None
Default behavior
MAC-based authentication is not performed.
Impact on communication
If the
no mac-authentication system-auth-control
are canceled.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. This command cannot be set if an authentication VLAN has been set.
Related commands
mac-authentication port
no mac-authentication system-auth-control
23. MAC-based Authentication
command is executed, the
command is executed, all authentications
583