Configuring The Authorization Id - Auerswald COMpact 3000 analog Operating Manual

When using the provider T-Online, the VoIP telephone numbers obtained
from the provider must also be entered under User Name and Name
(CONFIGURATION > External numbers > VoIP connection > Telephone
numbers).
Configuration can be carried out as follows:
• Separate for VoIP accounts
• Via the configuration manager
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in
the Upgrade Center)
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > External numbers.
2. In the list field at the top, select the VoIP connection in question.
A page opens for configuring the VoIP connection.
3. Open the page VoIP connection > Name and settings.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
4. In the list field at the top, select the account in question by its name.
5. Enter the user name in the User name entry field.
6. Enter the password in the Password entry field.
Further steps:
– Save your settings before you leave the page.

Configuring the Authorization ID

The authorisation ID is allocated during account configuration by some VoIP providers and is
required to access the VoIP account.
Configuration can be carried out as follows:
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Settings
VoIP
Configuring the Authorization ID
441