Internet Access; Configuring The Dns Server - Auerswald COMpact 3000 analog Operating Manual

Internet Access

In order to carry out Voice over IP and other functions, the PBX must be prepared for Internet
access by configuring a few settings.

Configuring the DNS Server

A DNS server is necessary for Internet access. The data is specified by the Internet service
provider or system administrator of the network.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Server configuration > Network.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
2. In the First DNS server and Second DNS server entry fields under DNS configu-
ration, enter the IP address for each of the DNS servers. The following entries are
possible:
IP address with a range of 0 to 255 (example: 192.168.0.12)
Note: If you cannot enter a DNS server, the gateway is automatically used
instead.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Settings
Internet Access
Configuring the DNS Server
351